Monitor specific INFINITI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.
Advanced LT is a plugin for Torque Pro, extending the PID/Sensor list with specific parameters from INFINITI vehicles, allowing you to try the plugin with limited sensors before buying. This version does not include calculated sensors like Injector Duty Cycle (%).
*PLEASE NOTE* that other INFINITI models/engines may be supported, but the plugin was tested only on the following models/engines equipped with DiagOnCan (CANBUS ONLY):
* EX25 2.5 V6 (J50 VQ25HR)
* EX35 3.5 V6 (J50 VQ35HR)
* EX37 3.7 V6 (J50 VQ37HR)
* FX35 3.5 V6 (S50 VQ35DE)
* G25 2.5 V6 (V36 VQ25HR)
* G35 3.5 V6 (V36 VQ35HR)
* G37 3.7 V6 (V36 VQ37HR)
* M35 3.5 V6 (Y50 VQ35DE)
* M25 2.5 V6 (Y51 VQ25HR)
* M35 3.5 V6 (Y51 VQ35HR)
For more information about INFINITI engines, visit http://en.wikipedia.org/wiki/List_of_Nissan_engines
Advanced LT requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.
Plugin Installation
-------------------------
1) After downloading the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.
2) Launch Torque Pro and click on the "Advanced LT" icon
3) Select the appropriate engine type and return to Torque Pro main screen
4) Go to Torque Pro "Settings"
5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".
6) Scroll down to "Manage extra PIDs/Sensors"
7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.
8) From the menu, choose "Add predefined set"
9) You may see predefined sets for other INFINITI engine types, so make sure you pick the right one.
10) After clicking on the entry from the previous step, you should see additional entries on the Extra PIDs/Sensors list.
Adding Displays
------------------------
1) After adding the additional sensors, go to the Realtime Information/Dashboard.
2) Press the menu key and then click on "Add Display"
3) Select the appropriate display type (Dial, Bar, Graph, Digital Display, etc)
4) Select the appropriate sensor from the list. Sensors provided by Advanced LT begins with "[IADV]" and should be listed right after the time sensors in the top of the list.
More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.
Pro torkla için bu eklentiyi ekleyerek motor ve otomatik şanzıman gelişmiş sensör verileri dahil olmak üzere gerçek-zamanlı olarak özel INFINITI parametreleri izleyin.
Gelişmiş LT Eğer satın almadan önce sınırlı sensörleri ile eklenti denemek için izin, INFINITI araçların belirli parametreler ile PID / Sensör uzanan liste, Pro Tork için bir eklenti. Bu sürüm Enjektör Görev Döngüsü (%) gibi hesaplanan sensörleri içermez.
* Diğer Infiniti modellerinde / motorları desteklenmektedir olabilir, ancak eklenti sadece DiagOnCan (CANBUS SADECE) ile donatılmış Aşağıdaki modeller / motorlarında test olduğunu * LÜTFEN DİKKAT:
* EX25 2.5 V6 (J50 VQ25HR)
* EX35 3.5 V6 (J50 VQ35HR)
* EX37 3.7 V6 (J50 VQ37HR)
* FX35 3.5 V6 (S50 VQ35DE)
* G25 2.5 V6 (V36 VQ25HR)
* G35 3.5 V6 (V36 VQ35HR)
* G37 3.7 V6 (V36 VQ37HR)
* M35 3.5 V6 (Y50 VQ35DE)
* M25 2.5 V6 (Y51 VQ25HR)
* M35 3.5 V6 (Y51 VQ35HR)
INFINITI motorlar hakkında daha fazla bilgi için, http://en.wikipedia.org/wiki/List_of_Nissan_engines ziyaret
Gelişmiş LT Pro çalışması için yüklü Tork son sürümünü gerektirmektedir. Bu * NOT * bağımsız bir uygulamadır ve irade * NOT * çalışma Tork olmadan Pro.
Eklentisi Kurulum
-------------------------
1) Google Play eklenti indirdikten sonra, size Android cihazınızda yüklü uygulamaların listesini listelenen eklenti görmek emin olun.
2) Tork Pro başlatın ve "Gelişmiş LT" ikonuna tıklayın
3) Uygun motor tipini seçin ve Tork Pro ana ekrana dönmek
4) Pro "Ayarlar" torkla git
5) "Ayarlar"> "Eklentiler"> "Yüklü Eklentiler" tıklayarak Pro Tork Ayrıca listelenen eklenti görebilirsiniz emin olun.
6) "ekstra PIDlerini / Sensörler Yönet" seçeneğine gelin
Eğer geçmişte herhangi bir ön tanımlı veya özel PID'lere eklediğiniz sürece 7) Genellikle bu ekran, tüm girdileri görüntüler olmaz.
8) menüsünden seçin "önceden tanımlanmış bir dizi Ekle"
9) Diğer INFINITI motor tipleri için önceden tanımlı ayarlar görmek, bu yüzden doğru bir seçim emin olabilir.
10) önceki adımdaki girişine tıkladıktan sonra, Ekstra PIDlerini / Sensörler listesinde ek girdileri görmelisiniz.
Ekranlar ekleme
------------------------
1) ilave sensörler ekledikten sonra, Gerçek Zamanlı Bilgi / Dashboard gidin.
2) Menü tuşuna basın ve sonra "Display Ekle" butonuna tıklayın
3) Uygun ekran tipini (Dial, Bar, Grafik, Dijital Ekran, vb seçin)
4) Listeden uygun sensörü seçin. Gelişmiş LT tarafından sağlanan Sensörler "[IADV]" ve sağ listenin üst zaman sensörler sonra listelenmiş olmalıdır başlar.
Diğer özellikler / parametreleri ileri sürümlerde eklenecektir. Eğer yorum ve / veya önerileriniz varsa bana bildirin lütfen.